Mini-split systems are actually known for being far more comfortable to install than their ducted counterparts. Unlike ducted systems, the installation process is minimally invasive, typically only requiring a little three-inch hole in the wall. As a result of their relatively simple installation process, they can usually be installed in as short as a few hours (depending on the system’s dimensions), rather than several weeks. Nevertheless, installing your mini-split system does require a little planning and prep work for it to run as effectively and efficiently as possible. Here are a few beneficial tips for mini-split installation success.
Select a LOCATION THAT CAN SUPPORT YOUR SYSTEM’S WEIGHT
One of the more important tips for mini-split installation success is actually to choose to install the system of yours in a location that is even sturdy enough to support its weight. Indoor mini-split units are fairly lightweight, often weighing between thirty to fifty pounds, regarding the size of the device. To stay away from damaging your ceiling or wall and avoid excessive system vibration, pick a spot that is actually sound enough to support the weight of the system of yours.
The outdoor part of a mini-split system is significantly heavier compared to the interior component. Often, mini-split outdoor units weigh between eighty and 250 pounds. Due to their large weight, homeowners should avoid placing them on the soft ground, which may shift and disrupt the system’s connections. Instead, consider placing the device on a level concrete pad, which will easily support your unit’s weight long term.
INSTALL YOUR INDOOR UNIT AWAY FROM OBSTRUCTIONS
Selecting the location of your interior unit can be a bit of a struggle. Even though many homeowners may consider positioning the system behind furniture or perhaps other obstructions to make it seem less conspicuous, doing so is not ideal from an efficiency standpoint.
By placing a mini-split system behind an obstruction, the power is to adequately heat, cool, or perhaps ventilate a space is actually impeded. As a result, you ought to decide to install your system in a spot that is actually at least one meter from any obstructions to guarantee that temperature-controlled air can flow freely throughout the space.
Pick AN AREA THAT DOESN’T EXPERIENCE TEMPERATURE FLUCTUATIONS
Mini-split systems are actually equipped with inverter technology, which will help increase the comfort level of the space and the system’s effectiveness when installed properly. Unlike traditional temperature control systems, the inverter technology in mini-split units allows them to change the amount of cold or hot air they emit by sensing the space’s heat. Doing so allows them to keep a regular, comfortable temperature without expending any more energy than is actually necessary.
Because mini-split systems alter their settings based on the room’s heat, it’s important not to set up the system in an area that experiences frequent or large temperature fluctuations. For instance, placing your mini-split in an area that receives direct sunlight can result in the sensor picking up on temperatures that are actually higher than the remaining portion of the space.
As a result, the system may cool the area by using much more power than is really necessary, which wastes energy and creates a less comfortable environment. Other areas that could experience more significant temperature fluctuations include those that are actually adjacent to windows or doors, close to heated appliances like stoves, or perhaps close to air vents. Ideally, the mini-split system should be installed in a shaded location away from other devices and closer to the center of one’s home for optimal temperature readings.
ENSURE THE INSTALLATION SITE Is actually FREE FROM ELECTROMAGNETIC INTERFERENCE
Besides choosing to install the mini-split system away from areas that experience temperature fluctuations, you also need to choose a location free from electromagnetic interference.
Examples of places in a home that often get a large amount of electromagnetic interference include next to microwaves, sensors, computers, cordless telephones, Bluetooth speakers, televisions, or perhaps near various other devices that emit electromagnetic signals. When a mini-split system is actually placed in one of these areas, the electromagnetic interference could stop it from operating properly and impede its effectiveness. Installing the mini-split system one meter or perhaps more away from such devices will typically make sure that it can run effectively.
Establish THE PROPER HEIGHT OF The SYSTEM of yours
Placement height is yet another crucial factor that will ensure the program yours will operate at effectiveness that is optimal after installation. When your system is actually placed way too low or perhaps too high, it might not have the ability to successfully distribute air throughout the area you want to heat or maybe cool.
The optimum height at which you install the mini-split system is going to depend on its configuration. For instance, wall mounted mini-splits should be installed a minimum of 6 feet high on a wall. Those whose walls are not at least 7 feet tall should stay away from installing a wall-mounted mini-split. On the other hand, floor-mount mini-splits have to be installed just a minimum of 6 inches off of the ground for effective operation. Nevertheless, homeowners should read through the installation manual that accompanies their specific mini-split system as clearance requirements may vary.
Think about the LOCATION OF THE CONDENSATE PUMP BEFORE INSTALLATION
Many homeowners make the mistake of installing their mini-split systems before considering where the condensate pump will go. A condensate pump is needed for most mini-split systems to drain the water generated during the heating or perhaps cooling process. Determining where this pump will go before installing the indoor unit can help ensure optimal placement in a location that will not lead to disruption from the extra noise that the pump may produce.
The Pioneer Mini Split Store is actually a leading provider of top-quality mini-split systems. Our wide range of innovative products includes wall-mounted, floor-mounted, and ceiling cassette mini-splits. We also offer both ductless and ducted options and multi-zone configurations that feature outstanding energy efficiency, sleek aesthetics, and a complete installation kit. To make sure you get probably the best deal, we will match any competitor’s lowest price and offer a 14-day money-back guarantee. In case you are interested in experiencing the numerous benefits that accompany installing a mini-split system in the house, contact the Pioneer Mini Split store today.
Click here to get the best Cooling Service in Brownwood
Recent Comments